|
Are you looking for:
|
10 LT Bucket
Industry standard plastic bucket, good quality and can be re-used many times.
When resin or Gelcoat is hardened just carefully flex and material will release from edges and can be removed.
These buckets are also solvent resistant thus enabling you to use them to wash tools in etc with solvents like Acetone.
Dimensions: H=205mm, top diam=310mm, base diam=240mm
|
Vinamold Red
Vinamold is a hot melt Vinyl Compound used for the preparation of
flexible moulds. Vinamold is reusable and is used as an alternative to
silicone rubbers, polyurethanes and rubber latex in the casting of
concrete, gypsum, polyester resins, reconstituted stone and glass fibre
laminates.
The natural and the red colours are the softest compound, for use when capturing detail is important.
|
AT195Ex trim
AT195 External Trim - High adhesion finish on outer face for step details, cover flashings etc.
Girth: 195mm
Flange widths: 85 & 105mm
|
Roller trays
Roller trays
|
G4 Damp Seal
1 Lt tin - G4 damp Seal
A moisture cured damp sealant - tough - non-porous, easy to apply.
Provides a hard wearing concrete floor seal.
When sheathing boat hulls, G4 is used as a bonding primer between the polyester resin and the wood and/or metal.
The hull should be dry and down to the bare wood or metal, apply the G4, and leave until finger tacky (but no longer than 4 hours), then the GRP laminate can be applied.
Consumption is approximately 200g/sq mt on wood and 165g/sq mt on metal.
More detailed instruction can be mailed upon request.
|