Please note there is a lead time on 225kg drums of this infusion resin. Please call us if required.
Catalyst included in all pack sizes.
A pre accelerated Isophthalic Polyester resin with low viscosity and controlled exotherm characteristics.
Please read technical data sheet for detailed information.
How much catalyst do i add to this polyester infusion resin?
You would add between 1 - 2 % catalyst.
Do i need to post cure my wheel arch after i have moulded with this infusion resin? i usually use epoxy.
Satisfactory laminates for many applications can be made from Crystic 701PAX by curing at workshop temperature
(20°C). For optimum properties, however, laminates should be post-cured before being put into service. The laminate should be allowed to cure for 24 hours at 20°C, and then be oven cured for 16 hours at 40°C or 3 hours at 80°C.