Infusion Resins

Epoxy and Polyester Infusion Resins 

These Resins are used specifically in the Resin Infusion process, low viscosity characteristics allow the Resin to flow through a ‘dry’ laminate which in turn will offer the part a better reinforcement to resin ratio with a low / no void laminate, reduced emissions are also an advantage to the operator. The Resin Infusion process sometimes called Vacuum Infusion is classed as a ‘Closed Mould’ process. 
Our EC 157 Resin we actually use in house to make Carbon Fibre parts, any technical questions please fill in the contact form or email us.

Loading...