White medium weight nylon fabric,coated with heat cured silicone release solution to aid removal from the cured laminate,working up to 400°F (204°C)
When using release fabrics on composite laminates
that will be subject to secondary bonding or painting
operations, there is a potential for minor transfer onto
the component, despite the release solution being fully
polymerised. It is therefore recommended that prior
to bonding or painting the laminate should be suitable
prepared (industry standard method is preparation by
slight abrading or sanding of the surface followed by
cleaning with an approved solvent).
Some phenolic resins are known to adhere to nylon
release fabrics, and it is therefore recommended that
the customer conduct their own internal compatibility
tests.
It is not recommended as the product will leave a thin film of silicone on the part which will make secondary bonding difficult.