Crystic Fireguard 73PA Fire Retardant Gelcoat



Price: £12.55
+ VAT
  • Description
  • Crystic Fireguard 73PA is a pre-accelerated filled brush gelcoat.

    Applications
    Crystic Fireguard 73PA can be used both internally and externally for building, transport and general industrial work.
    Features and Benefits
    Crystic Fireguard 73PA has very low flammability.
    Formulation
    Crystic Fireguard 73PA should be allowed to attain workshop temperature (18°C-20°C) before use. Stir well by hand or with a low shear stirrer to avoid aeration and then allow to stand to regain thixotropy. Crystic Fireguard 73PA requires only the addition of catalyst to start the curing reaction. The recommended catalyst is Butanox M50 (or other equivalent catalyst) which should be added at 2% into the gelcoat. (Please consult our Technical Service Department if other catalysts are to be used). The catalyst should be thoroughly incorporated into the gelcoat, with a low shear mechanical stirrer where possible.
    Application
    For normal moulding, the application of Crystic Fireguard 73PA should be controlled to 0.4 - 0.5mm (0.015 - 0.020 inch) wet film thickness. As a guide, approximately 550-750g/m² of gelcoat mixture (depending on pigment) will give the required thickness when evenly applied.

    PLEASE READ DATA SHEETS CAREFULLY BEFORE USE.








  • Safety Data Sheet
  • Crystic Fireguard 73PA Fire Retardant Gelcoat Safety Data Sheet

  • Technical Data Sheet
  • Crystic Fireguard 73PA Fire Retardant Gelcoat Technical Data Sheet

  • Customer Reviews

    (0.00)stars out of 5
    # of Ratings: 0
Loading...