G100 Spray Gun

Price: £141.50
+ VAT
  • Description
  • If you wish to spray Gelcoat use Spray Gelcoat for best results. Not suitable for brush-applied gelcoat.

    This professional grade sprayer is a must for every fiberglass, composite and cultured marble shop. This gun is used for spraying not only spray gelcoat and resins, but other materials such as parting films, spray gypsum, spray tooling gelcoats, sand able primers, granite enhanced gelcoats, adhesives and paints. With our largest nozzle, it will even sand blast. The easy to clean design means clean up times less than five minutes. Wipe the lid and nozzle, through away the cup, and you're ready to go again.

    Your gun will come with 1 x heavy duty plastic cup which will withstand acetone and keytones, and 5 paper cups.
    This model 100 is supplies with a nozzle cleaning brush (G300-FN-BRUSH), MIL gauge cast aluminium lid (G300-010-3), and a 3/16" (4.8mm) (G300-FN600) nozzle.
    This is a general purpose nozzle and other sizes may be purchased for better results with your particular application.

    Nozzle suggestions:
    Parting films – FN-1, FN-2.
    Paints – FN – 3.
    Resins – FN – 4.
    Gelcoats – FN – 5, FN – 6.
    Gelcoats with flake – FN – 7, FN – 8.
    Sand blasting – FN – 9.

    AIR REQUIREMENTS 60 to 100 psi (5.8 cfm@80psi).

    Data Sheets: G100 Operating Instructions       G100 Parts List


  • Technical Questions
  • What is the operating pressure for the G100 cup gun? 

    The operating pressure is 80 psi.

    How do I connect the G100 spray gun to an air hose? 

    To connect this gun to your air hose , providing your hose has a  10mm inside diameter such as the one we supply here you have two options:-
    Option 1 permanently attached to hose: connect a 1/4" bsp Hose Tail fitting - 10mm  to the gun then secure the hose to the tail with a jubilee clip. 
    Option 2 for a quick release of the gun from the hose:  use a 3/8 Hose tail coupling - 19KATF10MPX
    attached to the hose secured with a jubilee clip 
    Also attach a  Male Thread BSP Taper - 19SFAK13SXN screwed into the gun 
    This will allow you to attach and detach the gun easily for maintenance, cleaning and setup when needed. 

    Please note these fittings are not supplied with the gun and must be purchased separately if required. 

     

    Ask a question

  • Video


  • Technical Data Sheet
  • G100 Spray Gun Technical Data Sheet

  • Customer Reviews

    (0.00)stars out of 5
    # of Ratings: 0
Loading...