pay with visa matercard amex

Sika 209N Primer

  • Description
  • Due to the relatively short shelf life on this product, we do not hold any stock, lead time is 2-3 days.

    Primer-209 N is a black pigmented liquid of low viscosity which dries by reaction with atmospheric moisture. It is used to prime painted surfaces and plastic substrates prior to bonding with Sikaflex ® products. Sika ® Primer-209 N is manu- factured in accordance with the ISO 9001 /14001 quality assurance system.

    Areas of Application

    Suitable for application to the following substrates:

    Plastics , Acrylic (PMMA),  Polycarbonate , ABS etc.

    Paints:  Acrylics , Alkyds/melamins

    Because paints and plastics vary so much in their chemical compo-sition, preliminary trials are necessary. Always seek the manufactu-rer’s advice before using the primer on plastics that are prone to stress cracking, such as acrylics, polycarbonates or ABS.

    Method of Application

    Surfaces must be clean, dry and free from all traces of dust and grease. Wipe the bond face with Sika® Cleaner-226 and allow to dry. Shake the can of Sika® Primer-209 N thoroughly until paint mixing ball rattles freely. Mix for an additional one minute and apply a thin, even, coat with a brush or felt pad. Do not apply at temperatures below 50°F(10°C) or above 86°F(30°C.)

    Sika ® Primer-209 N should be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Re-seal container tightly after use. For transparent substrates such as PMMA and PC, bonding has to be done with Sikaflex


  • Safety Data Sheet
  • Sika 209N Primer Safety Data Sheet

  • Technical Data Sheet
  • Sika 209N Primer Technical Data Sheet

  • Customer Reviews

    (0.00)stars out of 5
    # of Ratings: 0