SP Microfibres 500g

Price: £14.50
  • Description
  • SP Microfibres are very fine wood-cellulose fibres commonly used to create structural adhesives for bonding
    both wood and grp.
    Because any low viscosity resin system is readily absorbed into a porous surface such as wood, an unfilled
    adhesive may tend to give a ‘dry joint’. With their absorbent properties, microfibres can retain a significant
    quantity of adhesive within a joint and limit resin absorption into the surrounding surface, thus ensuring an
    adequate resin supply for adhesion. Where the strongest bond is required, e.g. timber scarf joints,
    microfibres should always be used in preference to hollow sphere-types of filler.
    For bonding parallel to the grain with lower density, lower strength timbers, such as cedar or obeche, a microballoon mix is often
    adequate, and is of lower density.

  • Technical Questions
  • What is the particle size of the Microfibres?

    Normally between 200-300 microns.

    Ask a question

  • Technical Data Sheet
  • SP Microfibres 500g Technical Data Sheet

  • Customer Reviews

    (0.00)stars out of 5
    # of Ratings: 0