pay with visa matercard amex

WHITE Flow Coat / Top Coat (inclusive of catalyst)



Price: £5.95
+ VAT
  • Description
  • An Isophthalic Flowcoat for brush application. It has been carefully formulated to give excellent brushing properties. The thixotropy has been adjusted to minimise sag on inclined and vertical surfaces.

    Approved by Lloyd’s register of shipping for use in construction of reinforced plastic craft under their survey, and is widely used in the marine and construction industry's.

    Wax is added for a tack free surface, commonly used on Boats, Roofs, and other outside surfaces.

    Condition Flowcoat at 18 - 20 degress C prior to use, this will ensure a good coverage, if you want to lower the viscosity of the mix to help elimate brush marks add a little resin, but by doing this you may change the shade if you have ordered a colour and you will also effect the properties of the Flowcoat.



    Coverage is approximately 600g of Flowcoat per square metre, depending on operating temperature, therefore 1/2kg will cover 0.8 sq mt.



    Manufacturer: Scott Bader

    Material: 65pa


  • Customer Reviews

    (5.00)stars out of 5
    # of Ratings: 4
    1. on 16/04/2019, said:
    5 stars out of 5
    been using for many years ALWAYS a fantastic product TOP quality
    Was this comment helpful?
    (0 people found this comment helpful, 0 did not)
    2. on 31/05/2018, said:
    5 stars out of 5
    Ran out of the stuff but the order arrived promptly to minimise my cock-up!
    Was this comment helpful?
    (1 people found this comment helpful, 0 did not)
    3. on 01/05/2018, said:
    5 stars out of 5
    Arrived promptly, did the job well and dinghy now repaired and ready for me to damage again!
    Was this comment helpful?
    (2 people found this comment helpful, 0 did not)
    4. on 11/04/2018, said:
    5 stars out of 5
    Lays on lovely i used 1 thick coat with a brush then 1 thin coat with a roller 4hrs laters
    Was this comment helpful?
    (4 people found this comment helpful, 0 did not)
    Showing comments 1-4 of 4
Loading...