pay with visa matercard amex

Peel Ply - 1 mt Wide

(excl VAT)
Peel ply is a light weight fabric that is laid over the wetted out Reinforcement on the first coat, then more resin is applied using a squeegee to wet out the peel ply.. After the epoxy cures it is then removed, the result is a slightly textured, amine blush free surface.
Peel ply is also used when additional bonding and finishing operations are needed.

Customer Reviews

(4.00)stars out of 5
# of Ratings: 1
1. on 14/03/2019, said:
4 stars out of 5
Gives good surface to bond to
Was this comment helpful?
(1 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1

Do i need to wet out the peel ply with the epoxy resin after i have laminated the reinforcement onto my hull?
No, the peel ply can be placed on top of the existing laminate dry, it will absorb the resin underneath. Leave a small corner without any resin on , this helps when removing the peel ply, simply take hold of the dry section and pull it away from the surface.