Recently Viewed
Crystic 491pa is thixotropic, isophthalic polyester resin with good water and chemical resistance.
Ideal to make high performance boat hulls destined for tropical areas, a matched performance system when combined with Gelcoat 65pa (see polyester Gelcoats).
This resin is especially suitable for manufacturing vessels to contain food and potable liquids, such as drinking water. You must read thoroughly technical data sheet to follow post curing information if intended for this use.

Please read technical data sheet prior to ordering and use to determine suitability, there is also a chart in our project information pages, if unsure please call us with the particular application.

Full drums of this resin are available with or without catalyst.

Be the first to Write a Review for this item!

What is the HDT (heat deflection temperature) and to obtain its maximum what is the post curing schedule?


Crystic 491PA has a HDT of 77 Deg C on a fully cured laminate. The post curing schedule requires the laminate to be at 24 hours @ 20 Deg C followed by 5 hours @ 80 Deg C then 3 hours @ 120 Deg C . please read tech data sheet attached. 

Model:  1504-1504
Brand:  East Coast Fibreglass Supplies

Crystic 491 pa Resin (including catalyst)

Our Price:  £13.95
(Exc. 20% VAT)(£16.74 Inc. VAT)





Quantity:
+
Others Also Bought
Acetone
Acetone
From:  £5.90
Styrene
Styrene
From:  £4.95
450g (1.5 oz) Chopped Strand Matting - 1mt wide
Scott Bader White 337 Polyester Gelcoat
Scott Bader White 337 Polyester Gelcoat
From:  £8.95
100mm Velour Roller
100mm Velour Roller
From:  £1.18
Need help? Call us: 0191 4975134                                                                                                                                                                                                                                                     New Account | Sign In | Wish List